7
7.13.2 SCSI Data Cable Harness
7-50
Fan tray assembly
Hex-head screws
Figure 7-46 Fan Tray Assembly Removal and Replacement
To replace the fan tray assembly, reverse the preceding instructions.
Perform these tasks in order to replace the SCSI data cable harness.
Safety and Tools Requirements
Powering Off the System
Vented Front Panels
Rear Screen Panel
Differential SCSI Disk Tray
SCSI data cable
To remove the
see Figure 7-47 and proceed as follows:
Note – There are two identical data cable harnesses in the differential SCSI disk
tray. Each harness services one half of the tray.
SPARCcenter 2000/2000E Service Manual—June 1996
harness from the differential SCSI disk tray,
page 5-1
page 6-1
page 7-3
page 7-4
page 7-47