Sun Microsystems SPARCcenter 2000 Service Manual page 27

Nippon—Japan
Translation: This equipment is in the 1st Class category (information
equipment to be used in commercial and/or industrial areas) and conforms to
the standards set by the Voluntary Control Council For Interference by Data
Processing Equipment and Electronic Office Machines aimed at preventing
radio interference in commercial and/or industrial areas. Consequently, when
used in a residential area or in an adjacent area thereto, radio interference may
be caused to radios and TV receivers, etc. Read the instructions for correct
handling.
Caution – Do not make mechanical or electrical modifications to the
!
equipment. Sun Microsystems, Inc. is not responsible for regulatory
compliance of a modified SPARCcenter 2000 system cabinet.
Cables
All cables provided with the equipment are designed to reduce RFI emissions.
For regulatory compliance reasons, these cables must be used and must not be
replaced by any other cables.
Springfinger Considerations
Springfingers are metal strips between the edge of the printed circuit board
and the outer panel to reduce RFI emissions. Serrated metal fingers protrude
from either side of the strip.
Preface xxvii