3. Disconnect the fan #4 harness inline connector.
4. To remove the fan, loosen the two screws.
5. Replace the fan, if required.
6. To re-install, follow these steps in reverse order.
Red formatter fan (#5)
The red formatter fan provides cooling for the red light engine formatter board.
1. Remove the top cover (on page 38).
2. If the light engine coolant hoses are in the way, disconnect them.
3. Loosen the two screws securing the light engine security cover.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-06 Rev. 1 (08-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Ventilation and cooling
57