3. Disconnect the fan #4 harness inline connector.
4. To remove the fan, loosen the two captive screws.
5. Replace the fan.
6. To re-install, follow these steps in reverse order.
Replacing the red formatter fan (#5)
1. Remove the top cover (on page 39).
2. If the light engine coolant hoses are in the way, disconnect them.
3. To remove the light engine security cover, loosen the two captive screws using a 3 mm driver.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-03 Rev. 1 (11-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Ventilation and cooling
57