Green Formatter Fan (#4) - Christie Cinema 4K-RGB Service Manual

3. Remove the light engine intake fans (on page 60).
4. Disconnect the fan #3 harness inline connector.
5. To remove the fan and bracket, loosen the screw.
6. Remove the four screws securing the fan to the bracket.
7. Replace the fan, if required.
8. To re-install, follow these steps in reverse order.

Green formatter fan (#4)

The green formatter fan provides cooling for the green light engine formatter board.
1. Remove the top cover (on page 38).
2. To remove the light engine security cover, loosen the two screws.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-06 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Ventilation and cooling
56