Replacing The Green Formatter Fan (#4) - Christie Cinema 4K-RGB CP4315-RGB Service Manual

3. Remove the light engine intake fans (on page 60).
4. Disconnect the fan #3 harness inline connector.
5. To remove the fan and bracket, loosen the captive screw.
6. Remove the four screws securing the fan to the bracket.
7. Replace the fan.
8. To re-install, follow these steps in reverse order.

Replacing the green formatter fan (#4)

The green formatter fan provides cooling for the green light engine formatter board.
1. Remove the top cover (on page 39).
2. To remove the light engine security cover, loosen the two captive screws using a 3 mm driver.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-03 Rev. 1 (11-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Ventilation and cooling
56