Filtration; Replacing The Air Filter - Christie Crimson Series Service Manual

Hide thumbs Also See for Crimson Series:

Table of Contents

Filtration

Filters help to prevent dust, smoke, fog, and other foreign materials from entering the projector.

Notice. If not avoided, the following could result in property damage.

•

Do not operate the product without the filter installed.

•

Do not operate the product with an incorrectly installed filter.

•

Do not reuse an old air filter.

The air filter is located on the air intake side cover.

1. To open the air filter door, loosen the two captive screws.

2. Replace the used air filter with a new one.

The airflow indicator on the new filter must point into projector.

3. Close the air filter door.

4. Tighten the two screws.

Crimson Service Guide–Crimson HD25, Crimson WU25, Crimson HD31, Crimson WU31, Mirage HD25, Mirage WU25

020-102733-02 Rev. 1 (01-2020)

Table of Contents