Main Intake Air Filter - Christie Cinema 4K-RGB Service Manual

5. Re-install the air filter bracket using the two locating pins and fasteners.
6. Re-install the top cover.

Main intake air filter

The main intake air filter is located behind the side-intake cover.
1. Remove the side-intake cover (on page 41).
2. Pull out the air filter from the projector.
3. Replace the used air filter with a new one.
4. Re-install the side cover.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-06 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Service setups
29