Replacing The Main Intake Air Filter - Christie Cinema 4K-RGB CP4315-RGB Service Manual

5. Re-install the air filter bracket using the two locating pins and captive fasteners.
6. Re-install the top cover.

Replacing the main intake air filter

The main intake air filter is located behind the side-intake cover.
1. Remove the side cover.
2. Pull out the air filter from the projector.
3. Replace the used air filter with a new one.
4. Re-install the side cover.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-03 Rev. 1 (11-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Filtration
38