Otto Bock Pheon 3R62 Instructions For Use Manual page 38

INFORMATION
At a flexion angle > approx. 110°, the extension assist automatically moves the prosthetic knee
joint against the flexion stop. This function is activated in particular when kneeling.
Inform the patient.
►
6.2 Using the Lock Slide
CAUTION
Malfunctions and improper use of the lock
Falling due to unexpected activation or deactivation of the prosthetic knee joint lock
► Fully extend the prosthetic knee joint when you want to activate the lock. Then carefully
check whether the lock has actually engaged.
► Only deactivate the lock when you are able to control flexion of the prosthetic knee joint.
► Ensure that the lock is not activated or deactivated unintentionally while walking.
When using the lock, check whether the lock slide has actually engaged.
►
Inform the patient.
►
6.3 Cleaning
CAUTION
Use of unsuitable cleaning agents or disinfectants
Impairment of functionality and damage due to incorrect cleaning agents or disinfectants
► Only clean the product with the approved cleaning agents.
► Only disinfect the product with the approved disinfectants.
► Observe the instructions for cleaning and care.
Inform the patient.
►
INFORMATION
► Clean the product if it gets dirty.
► For disinfection, only use disinfectants that do not affect the materials of the product. For
further information, please consult the manufacturer.
► Observe the cleaning instructions for all prosthetic components.
Cleaning up Minor Dirt
1) Clean the product with a damp, soft cloth.
2) Dry the product with a soft cloth.
3) Allow to air dry in order to remove residual moisture.
Cleaning Heavy Dirt
Required materials: Cleaning cloth, 634A58 Isopropyl Alcohol, soft cloth
>
1) NOTICE! Verify material compatibility! Do not remove lubricant from bearing points!
Clean the product with a cleaning cloth and isopropyl alcohol.
2) Dry the product with a cloth.
Cleaning with Disinfectants
Required materials: colourless, alcohol-free disinfectant (verify material compatibility!), soft
>
cloth
1) Disinfect the product with the disinfectant.
2) Dry the product with a cloth.
3) Allow to air dry in order to remove residual moisture.
38 | Ottobock