Panasonic FP7 Series Command Reference Manual page 654

14.1 BCC (Block Check Code Calculation)
● The block check code (BCC) for the targeted data, which is the number of bytes specified by
[S3] starting from the calculation start position specified by [S2], is calculated with the
calculation method specified by [S1].
● The calculation result is stored according to the conversion method specified by [S1], starting
from the storage position specified by [D] and [S1].
■
Specification of control data [S1]
H
■
Conversion example
● Calculate the block check code (BCC) for a message to be sent "%01#RCSX0000", and
append the result to the message.
14-4
Specify a calculation method
0: Addition
1: Subtraction
2: Exclusive OR
Calculation start position (bytes
from [S2])
0 to F
Storage start position (bytes from [D])
0 to F
Data to be converted
0: Binary data (1 byte)
1: ASCII code (2 bytes)
As indicated below, calculation should be
carried out as specified, for every eight bits.
% H 25 00100101
0 H 30 00110000
1 H 31 00110001
# H 23 00100011
R H 52 01010010
Specified calculation
(a)
(b)
(c)
(d)
(e)
WUME-FP7CPUPGR-12
(a)
(b)
(c)
(d)
(e)
[S3] = K0 ： ＋
[S3] = K1 ： －
[S3] = K2 ： XOR