Panasonic FP7 Series Command Reference Manual page 1016

17.24 SMTPcSET (Mail Transmission Setting)
Set Description
Number of
transferred
data
Specify the number of transferred data (number of data). (1 to 1000)
(data
amount)
Specify a conversion method.
Parameter
BIN1w
US
SS
UL
SL
Conversion
SF
method
DF
HEX1w
HEX2w
HEX4w
ASCII
* BIN1w cannot be specified for adding to mail texts.
For specifying BIN1w, select "Method for adding attached files".
Specify line feed position.
Line feed ● The setting range is 0 to 255.
position
0: Output the end of file only
n: Output by n data
■
Operand [S4] Attached file setting
Setting item
Attached File
Name
File name
Automatic
addition position
(Note 1) When omitting "File name automatic addition position", automatic additional data is not added to the
file name.
(Note 2) Specify the operation setting parameters in the order of the above table.
Setting example
Exam
S4 "INFO=NON,ATT=NONE"
ple 1
17-128
Description
Output a device value, and specify the name of the file to be attached to the mail after the
keyword "FILE=".
FILE=xxxxxxxxx
Specify the position of the automatic additional data added to a file name.
TOP: Automatic additional data is added before a file name.
END: Automatic additional data is added after a file name.
* Automatic additional data is year, month, day, hour, minute and second
"(yymmdd_hhmmss)".
: Unconverted 16-bit binary
: 16-bit unsigned decimal
: 16-bit signed decimal
: 32-bit unsigned decimal
: 32-bit signed decimal
: 32-bit single-precision floating point
: 64-bit double-precision floating point
: 16-bit HEX
: 32-bit HEX
: 64-bit HEX
: ASCII character (Output enclosed with "")
WUME-FP7CPUPGR-12