Panasonic FP7 Series Command Reference Manual page 992

17.20 SMTPcBDY (Mail Text Setting)
Setting example
Example)
・Mail text example
Floor A: 25 degrees C.
Floor B: 28 degrees C.
S1="ID5" S2=DT200
DT200
H 6C(l)
DT201
DT202 H 6F(o)
H 20(␣)
DT203
H 3A(:)
DT204
H 32(2)
DT205
H 20(␣)
DT206
H 65(e)
DT207
DT208 H 72(r)
DT209 H 65(e)
DT210 H 20(␣)
DT211 H 2E(.)
H 46(F) H 0D(CR)
DT212
DT213 H 6F(o)
DT214 H 72(r)
DT215 H 42(B)
DT216 H 20(␣)
DT217 H 38(8)
DT218 H 64(d)
DT219 H 67(g)
DT220 H 65(e)
DT221 H 73(s)
H 43(C)
DT222
DT223 H 00
■
Flag operations
Name Description
To be set in case of out-of-range values in indirect access (index modification).
To be set when the slot number [S1] specified with UNITSEL is not 100 (built-in ET-LAN).
To be set when an out-of-range value is specified for parameters.
SR7
Set when executed in an interrupt program.
SR8
To be set when the send request of the mail transmission control relay of a target ID number is 1:
(ER)
Requesting.
To be set when the mail transmission setting for a target ID number is not set with the mail
transmission setting instruction or the tool software.
CY
Set when the instruction is the initialization of Ethernet. The detail code set in SD29 is "11:
Ethernet initialization active".
(SR9)
(Note 1) For details of the error codes stored in the system data SD29, refer to
Registers".
17-104
H002D No. of bytes
H 46(F)
Data part
H 6F(o) Data part
H 72(r) Data part
H 41(A) Data part
H 20(␣) Data part
H 35(5) Data part
H 64(d) Data part
H 67(g) Data part
H 65(e)
Data part
Data part
H 73(s)
H 43(C) Data part
Data part
H 6C(l) Data part
H 6F(o) Data part
H 20(␣) Data part
H 3A(:) Data part
H 32(2) Data part
H 20(␣) Data part
H 65(e) Data part
H 72(r) Data part
H 65(e) Data part
H 20(␣)
Data part
H 2E(.) Data part
"20.2 List of System Data
WUME-FP7CPUPGR-12