Panasonic FP7 Series Command Reference Manual page 933

Setting example
S1
Exam
ple 1
Settings
Setting example when omitting a part of a keyword
S1
Exam
ple 2
Settings
S1
Exam
ple 3
Settings
S1
Exam
ple 4
Settings
■
Details of operand [S2]
Specify the starting address of the device area that stores the string data that indicates the
parameters for specifying time acquisition timing, or a character constant.
Setting
Settings
item
Once daily
Appointed time
(can be omitted)
Once weekly
Specified day of
the week and
S2
time
(can be omitted)
Once monthly
Specified date
and time
(can be omitted)
● Input "Once daily/specified time", "Once weekly/specified day of the week and time" or "Once
monthly/specified date and time" separated by a comma ",".
● The keywords should be specified in the order shown in the above table. Both upper and
lower cases can be used for specifying keywords.
● A part of parameters can be omitted. Omitted parameters are not changed.
● When omitting the part before a specified keyword, omit only "keyword" without omitting ",".
● When omitting the part after a specified keyword, omit both "," and "keyword".
● It is prohibited to specify the same keyword redundantly. An error is caused in the case of
redundant specification.
Setting example
S2
Exam
ple 1
Settings
WUME-FP7CPUPGR-12
17.9 NTPcSV (NTP Destination Server Setting Instruction)
"IPv4=111.122.133.144,TIMEZONE=+0900"
NTP server (IPv4): 111.122.133.144, Time zone: GMT+09:00
"HOST=ntp.pidsx.com"
NTP server (Host name): ntp.pidsx.com, Time zone: Unchanged
",TIMEZONE=+0900"
NTP server (IPv4): Unchanged, Time zone: GMT+09:00
""
NTP server (IPv4): Unchanged, Time zone: Unchanged
Time data acquisition timing: Once a day at a specified time.
DAY=DISABLE: Not set
HHMM: Set, HH: hour "00" to "23", MM: minute "00" to "59"
Time data acquisition timing: Once a week at a specified day of the week and
time.
WEEK=DISABLE: Not set
WHHMM: Set, W: 0 (Sunday) to 6 (Saturday), HH: hour "00" to "23", MM:
minute "00" to "59"
Time data acquisition timing: Once a month at a specified date and time.
MONTH=DISABLE: Not set
DDHHMM: Set, DD: "01" to "28", HH: hour "00" to "23", MM: minute "00" to
"59"
"DAY=1234,WEEK=62345,MONTH=010010"
Once daily/specified time: Once daily at 12:34, Once weekly/specified day of the week
and time: Every Saturday at 23:45, Once monthly/specified date and time: First day of
every month at 00:10
17-45