Panasonic FP7 Series Command Reference Manual page 857

■
Acquired data (PLC link time interval information): When [S] = 4
Storage
locatio Items
n
RING counter for the
[D]
number of receptions
Current receive
[D+1]
interval (x 1 ms)
Minimum receive
[D+2]
interval (x 1 ms)
Maximum receive
[D+3]
interval (x 1 ms)
RING counter for the
[D+4] number of
transmissions
Current send interval
[D+5]
(x 1 ms)
Minimum send interval
[D+6]
(x 1 ms)
Maximum send interval
[D+7]
(x 1 ms)
■
Acquired data (PLC link setting parameter monitoring information): When [S] = 5
Storage
locatio Items
n
Link area block
[D]
number
PLC link W0 maximum
[D+1]
station number
[D+2] Range of link relays
[D+3] Range of link registers
Link relay sending start
[D+4]
number
Size of link relay send
[D+5]
area
Link register sending
[D+6]
start number
Size of link register
[D+7]
send area
[D+8] to
Reserved for system
[D+11]
WUME-FP7CPUPGR-12
15.9 PMGET (Acquiring SCU Parameters)
Range: Description
U0 to The number of receptions is stored. When the value exceeds
U65535 65535, it returns to 0.
-
- The reception interval is stored.
-
U0 to The number of transmissions is stored. When the value
U65535 exceeds 65535, it returns to 0.
-
- The send interval is stored.
-
Range: Description
The block number of the link relay/link register area is stored.
U0, U1
U0, U1: Block number of the master unit
HFFFF
HFFFF: Other units
U2 to U16 Values out of the range are handled as "16".
Specify the range of link relays used for communication
U0 to U64 (specification by number of words, relative values within the
specified block)
Specify the range of link registers used for communication
U0 to U128
(relative values within the specified block)
Link relay sending start number (specification by number of
U0 to U63
words, relative value within the specified block)
Size of link relay send area (specification by number of
U0 to U64
words)
Link register sending start number (specification by number of
U0 to U127
words, relative value within the specified block)
Size of link register send area (specification by number of
U0 to U127
words)
- Reserved area
15-63