Panasonic FP7 Series Command Reference Manual page 895

17.2 ETSTAT (Acquiring Ethernet Unit Information: IP/MAC/Destination)
Storage
[S1][S2]
location
[D+4]- [D+7]
[D+8]- [D
+11]
[D+12]
or
"CONNECT
[D+13]
2"
[D+14]- [D
+17]
[D+18]
Total number of words
(Note 1) For IPv4, a decimal number is stored in each area of the storage.
Example) When the master unit IP address is 192.168.1.5, the IP address is stored as follows:
[D]=U192, [D+1]=U168, [D+2]=U1, [D+3]=U5
(Note 2) The destination varies depending on the setting of the communication method (TCP/UDP) as shown in
the following table.
Communication
method
TCP client
TCP server (specific
partner unit)
TCP server (any
partner unit)
UDP
Storage
[S1][S2]
location
[D] - [D+7]
[D+8]- [D
+15]
[D+16] - [D
[S1]: "IPv6"
+23]
[S2]: "MAC"
[D+24] - [D
+31]
[D+32]
WUME-FP7CPUPGR-12
Name
Subnet mask (IPv4)
Default gateway (IPv4)
Master unit port number
Destination IP address
type
Destination IP address
Destination port number
Setting of [S2]
CONNECT, CONNECT1
Partner unit (server) that is set as the
destination
Partner unit (client) that is allowed to be
connected
Partner unit (client) that is connected
most recently
A partner unit (client) has never been
connected: 0
Partner unit that is set as the destination (for master communication)
Name
Master unit IP address 1
(IPv6)
Master unit IP address 2
(IPv6)
Master unit IP address 3
(IPv6)
Master unit IP address 4
(IPv6)
Subnet prefix length
Number Forma
Description
of words t
Decim
4 Subnet mask
al
Decim
4 Default gateway
al
Decim The master unit port number in
1
al use
Decim
1 0:IPv4
al
Destination IP address (for IPv4)
Decim
4
(Note 2)
al
Decim
1
Partner unit port number
al
19 -
CONNECT2
● Partner unit (server) to which
● No connection is established:
● Partner unit (client) whose
● No connection is established:
Number Forma
Description
of words t
Hexad Master unit IPv6 address (Manual
8
ecimal setting)
Home IPv6 address (Link local)
Hexad
8
ecimal (Note 2)
Hexad Home IPv6 address (Router)
8
ecimal
3)
Hexad Home IPv6 address (DHCP)
8
ecimal
3)
Decim
1 Subnet prefix length
al
(Note 2)
the connection is established
0
connection is established
0
(Note
(Note
17-7