Panasonic FP7 Series Command Reference Manual page 926

17.6 CONSET (User Connection Setting)
Setting
Settings
item
Setting end connection
D2
number
■
Flag operations
Name Description
To be set when [D1] is larger than [D2].
To be set when [D1] and [D2] exceed the number of user connection information settings.
Set when a value outside the range is specified for the parameter.
Set when the same keyword is specified redundantly.
To be set when the slot number [S1] specified with UNITSEL is not 100 (built-in ET-LAN).
To be set when the lower one block of IP address exceeds the available range when
incremented.
To be set when the master unit port number exceeds the settable range when incremented.
To be set when executed in an interrupt program.
SR7
Set when the number of characters for operand specifying character constant exceeds 256.
SR8
To be set when there is an open connection.
(ER)
To be set when there is a connection with the automatic open setting.
An operation error occurs if a set of connections in the range that is specified by [D1] and [D2]
contains connections for a multi connection server.
To be set when "GP_LARGE" is specified for the operation mode setting in [S1] and "OPTNAV" is
specified for the option setting in [S1].
To be set when "GP_LARGE" is specified for the operation mode setting in [S1] and "UDP" is
specified for the communication method in [S1].
To be set when "GP_LARGE" is specified for the operation mode setting in [S1] and [D1] or [D2]
is not 1.
Set when the instruction is executed while the specified IP address is incorrect. The detail code
CY set in SD29 is "1: Specification of incorrect IP address".
(SR9) To be set when the instruction is executed while the IP address is not established. The detail
code set in SD29 is "12: IP address not established".
(Note 1) For details of the error codes stored in the system data SD29, refer to
Registers".
17-38
Specify setting end connection number.
Setting range
1 to 216
(maximum)
"20.2 List of System Data
WUME-FP7CPUPGR-12