Panasonic FP7 Series Command Reference Manual page 971

● It is prohibited to specify the same keyword redundantly. An error is caused in the case of
redundant specification.
Setting
Settings
item
HTTP server
number
(Essential)
IP address or
host name of
HTTP server
(Essential)
S1
Port No.
(Can be
omitted)
SSL3/TLS1
Authentication
(Can be
omitted)
(Note 1) Input an HTTP server number, the IP address or host name of an HTTP server, a port number, and the
SSL3/TLS1 authentication setting separated by a comma ",".
(Note 2) Both upper and lower cases can be used for specifying keywords.
(Note 3) Specify the parameters for specifying servers in the order of the above table.
Setting example
Exam
S1 "SV0,IPv4=192.255.2.10,PORT=80,SSL"
ple 1
HTTP server number: 0, IP address: 192.255.2.10, Port number: 80, SSL3/TLS1 authentication:
Settings
Use
Exam
S1 "SV1,IPv6=1111:1222::1555:0:0:1888,PORT=8080,SSL"
ple 2
HTTP server number: 1, IP address: 1111:1222::1555:0:0:1888, Port number: 8080, SSL3/TLS1
Settings
authentication: Use
Exam
S1 "SV2,HOST=HTTP.pidsx.com,PORT=80,NON"
ple 3
HTTP server number: 2, Hos name: HTTP.pidsx.com, Port number: 80, SSL3/TLS1
Settings
authentication: Not use
■
Operand [S2] setting
● Specify the starting address of the device area that stores the login setting parameter, or a
character constant.
WUME-FP7CPUPGR-12
17.16 HTTPcSV (HTTP Client Connected Server Setting)
Specify HTTP servers.
Specify the following keywords.
SV0: Server 0, SV1: Server 1, SV2: Server 2, SV3: Server 3
Specify IP address or host name.
For an IP address, specify the keyword "IPv4=" or "IPv6=" at the beginning. For
a host name, specify "HOST=".
● For IPv4
IPv4=111.122.133.144
● For IPv6
IPv6=1111:122:2:1555:0:0:1888
* For details of the range of IPv4 addresses that can be specified, refer to
"19.10 Ethernet Function: IP Addresses"
● For a host name:
HOST=HTTP.pidsx.com
Specify port number. Port No. Range: 1 to 65535
PORT=: Port number (Default: 80)
Specify whether or not to use SSL3/TLS1 authentication.
SSL: Use SSL3/TLS1
NON: Not use (Default: Not use)
"IP address setting specifications".
17-83