Panasonic FP7 Series Command Reference Manual page 945

Hide thumbs Also See for FP7 Series:

Table of Contents

The retry interval can be specified in 10-second units. It is rounded down to the nearest 10. (Example:

When specifying 38 seconds, it becomes 30 seconds.)

Setting example

"TOUT=30,RTRY=2,RTTM=500"

Timeout period: 30 seconds, No. of retries: 2, Retry interval: 500 seconds

"TOUT=270,RTRY=0,RTTM=4900"

Timeout period: 270 seconds, No. of retries: 0 (Not retry), Retry interval: 4900 seconds

"TOUT=30,RTRY=25"

Timeout period: 30 seconds, No. of retries: 25, Retry interval: Not change

",RTRY=25,RTTM=3000"

Timeout period: Not change, No. of retries: 25, Retry interval: 3000 seconds

Special keyword of operand [S3] setting

Special keyword

Setting example

Timeout period: 60 seconds, Number of retries: 3, Retry interval: 600 seconds

Timeout period: Not change, Number of retries: Not change, Retry interval: Not change

Flag operations

Set when a value outside the range is specified for the parameter.

Set when the same keyword is specified redundantly.

To be set when even one request active relay of FTPc control relay or FTPc logging/trace control

relay is 1: Requesting.

To be set when "Add-on" is set to "Not use" in Built-in ET-LAN setting.

To be set when server numbers are not specified in the right order.

To be set when the slot number [S1] specified with UNITSEL is not 100 (built-in ET-LAN).

Set when executed in an interrupt program.

Set when the number of characters for operand specifying character constant exceeds 256.

Set when the instruction is executed while the specified IP address is incorrect. The detail code

set in SD29 is "1: Specification of incorrect IP address".

To be set when executed during the initialization of Ethernet. The detail code set in SD29 is "11:

Ethernet initialization active".

WUME-FP7CPUPGR-12

17.11 FTPcSV (FTP Client Connected Server Setting)

Set an initial value.

The current setting is not changed.