Panasonic FP7 Series Command Reference Manual page 972

17.16 HTTPcSV (HTTP Client Connected Server Setting)
● A part of parameters can be omitted. The settings are not changed when parameters are
omitted partially.
● When omitting the part before a specified keyword, omit only "keyword" without omitting ",".
● When omitting the part after a specified keyword, omit both "," and "keyword".
● When "INITIAL" or "KEEP" is specified instead of parameters, the instruction operates
according to the table of special keywords.
● It is prohibited to specify the same keyword redundantly. An error is caused in the case of
redundant specification.
Setting item Settings
User name
(Can be omitted)
S2
Password
(Can be omitted)
(Note 1) Input a user name and password separated by a comma ",".
(Note 2) Both upper and lower cases can be used for specifying keywords.
(Note 3) Specify the login setting parameters in the order of the above table.
Setting example
Exam
S2 "USER=root,PASS=pidsx"
ple 1
Settings User name: root, Password: pidsx
Exam
S2 "USER=PANASONIC,PASS=SUNX"
ple 2
Settings User name: PANASONIC, Password: SUNX
■
Operand [S2]: user name and password setting
Patterns
Specify user name: Delete password
Delete user name: Specify password
Delete user name: Delete password
Specify user name: Not change password
Not change user name: Specify password
Setting example
Exam
S2 "USER=root,PASS="
ple 1
Settings User name: root, Password: Delete
Exam
S2 "USER=,PASS=SUNX"
ple 2
Settings User name: Delete, Password: SUNX
17-84
Specify a user name.
Specify the keyword "USER=" at the beginning.
USER=XXX (Default: root)
Specify a password.
Specify the keyword "PASS=" at the beginning.
PASS=XXX (Default: root)
How to specify
"USER=xxx,PASS="
"USER=,PASS=xxx"
"USER=,PASS="
"USER=xxx"
",PASS=xxx"
Setting
range
Maximum 32
one-byte
characters
Maximum 32
one-byte
characters
WUME-FP7CPUPGR-12