Pmget (Acquiring Mewnet-F Parameters) - Panasonic FP7 Series Command Reference Manual

16.5 PMGET (Acquiring MEWNET-F Parameters)

16.5 PMGET (Acquiring MEWNET-F Parameters)
■
Ladder diagram
(Note 1) The above figure shows the case that the FP7 multi-wire link unit for S1=U1 (slot number 1) is
specified by the UNITSEL instruction.
■
List of operands
Operand Description
Type of acquired data
S
0: Number of F link services, 1: F link operation state monitor
Starting address of the area that stores the acquired communication parameter (monitor
D
information)
■
Available devices (●: Available)
Operan
d
W W
X Y
S ● ●
D ● ●
■
Outline of operation
● Monitor information showing the communication state can be acquired.
● MEWNET-F communication parameters of the FP7 multi-wire link unit are read and stored in
the area that starts with [D].
● Specify the type of acquired data in [S].
■
Precautions for programming
● Describe the UNITSEL instruction immediately before the PMGET instruction. Specify the
slot number of the unit from which the parameters are acquired for [S1] and specify 0 for
[S2].
● The size of the area storing data varies in the range of 1 to 10 words according to the data
type specified in [S].
16-18
16-Bit device:
W W W S D L
R L S D T D
● ● ● ●
● ● ● ●
32-Bit
device:
TS TE
U W
WI IX
C C
M O
S E
Real St
Integer numbe rin
r g
D
K H SF " "
Ｕ
F
●
WUME-FP7CPUPGR-12
Index
modifie
r
●
●