Smtpcsv (Mail Server Setting) - Panasonic FP7 Series Command Reference Manual

17.22 SMTPcSV (Mail Server Setting)

17.22 SMTPcSV (Mail Server Setting)
■
Ladder diagram
(Note 1) The above figure shows the case that S1=U100 (built-in ET-LAN in the CPU unit) and S2=U1
(connection number 1) are specified by the UNITSEL instruction. Set a desired value for [S2].
(Note 2) By copying and pasting the following text in the instruction list box of FPWIN GR7, the operand part of
the above program can be input.
SMTPcSV "name=fp7,from=abc@xxx.com,IPv4=192.168.1.1" "cram,account=abc,pass=xxx" "initial"
■
List of operands
Operand Description
Starting address of the device area that stores the string data that indicates sender information and
S1
mail sending server information, or a character constant.
Starting address of the device area that stores the string data that indicates the authentication
S2
setting parameters, or a character constant.
Starting address of the device area that stores the string data that indicates the detailed setting
S3
parameters, or a character constant.
■
Devices that can be specified (indicated by ●)
Operan
d
W W
X Y
S1 ● ●
S2 ● ●
S3 ● ●
■
Outline of operation
● This instruction sets the information of the connected mail sending server and the sender.
■
Processing
● The mail sending server setting and the sender setting are configured in the CPU unit
according to specified parameters.
17-108
16-Bit device:
W W W S D L
R L S D T D
● ● ● ●
● ● ● ●
● ● ● ●
32-Bit
device:
TS TE
U W
WI IX
C C
M O
S E
Real St
Integer numbe rin
r g
D
K H SF " "
Ｕ
F
●
●
●
WUME-FP7CPUPGR-12
Index
modifie
r