Panasonic FP7 Series Command Reference Manual page 964

17.14 FTPcREQ (FTP Client Transfer Request)
Name Description
To be set when the FTP client preparation done (X65) is OFF at the time of the execution of
instruction.
Set when a value outside the range is specified for the parameter.
(ER) To be set when the transfer request relay of a specified ID is "Request".
Set when executed in an interrupt program.
To be set when a file transfer that has not been specified with the transfer setting instruction or the
tool software is specified.
To be set when executed while the Ethernet cable is disconnected. The detail code set in SD29 is
CY "10: Ethernet cable disconnected".
(SR9) To be set when executed during the initialization of Ethernet. The detail code set in SD29 is "11:
Ethernet initialization active".
(Note 1) For details of the error codes stored in the system data SD29, refer to
Registers".
17-76
"20.2 List of System Data
WUME-FP7CPUPGR-12