Panasonic FP7 Series Command Reference Manual page 790

14.36 EMIDW (Rewrite from a Given Position in the String: With Storage Area
Size)
(Note 1) The data (*) for DT26 that is out of the destination range does not change.
Area in which the string to
(a)
be taken out is stored
(1) Storage area size
Example 2) Taking out the four characters "ABCD" from the DT0 string to transfer
them to the 1st byte (2nd character) of the DT20 string
This indicates that the number of characters specified for [S2] is larger than the number of
characters for the string that is stored in [S1].
[S1]...DT0 [S2]...U5 [D]...DT20 [n]...U1
(Note 1) The data (*) for DT26 that is out of the destination range does not change.
Example 3) When the number of characters that were taken out exceeds the storage
area size for [D]
Only the amount of characters that can be stored in [D] starting from the 7th is transferred, and
carry flag SR9 (CY) is set to ON.
[S1]...DT30 [S2]...U5 [D]...DT50 [n]...U7
14-140
Destination area (before
(b)
transferring)
(2) Character count
Destination area (after
(c)
transferring)
-
WUME-FP7CPUPGR-12