Panasonic FP7 Series Command Reference Manual page 949

an operand, set string data using the SSET instruction in advance. However, the ESSET
instruction cannot be used because the format is different.
● The number of characters should not exceed 256.
● Both upper and lower case characters can be used. "Abcd", "ABCD" and "abcd" are all
synonymous. However, the folder name and the file name that are included in a path name
are case-sensitive.
● This instruction is not available in interrupt programs.
■
Operand [S1] setting
● Specify the starting address of the device area that stores the string data that indicates a
transfer setting number, or a character constant.
Setting
Settings
item
Transfer setting
S1
number
(Note 1) Transfer setting numbers should be specified from number 0 in ascending order. An error occurs when
transfer setting numbers are not specified in ascending order. If transfer settings have been already
registered, this rule is not applied.
Setting example
Exam
S1 "ID=1"
ple 1
Settings Transfer setting number: 1
Exam
S1 "ID=8"
ple 2
Settings Transfer setting number: 8
■
Operand [S2] setting
● Specify the starting address of the device area that stores the operation setting parameter, or
a character constant.
Setting
Settings
item
Specification of
FTP server
S2
Target and
operation of
transfer
WUME-FP7CPUPGR-12
17.12 FTPcSET (FTP Client Transfer Setting)
Specify a transfer setting number. ID=: Transfer setting
number
Specify FTP servers. (3 digits fixed)
SV0: Server 0, SV1: Server 1, SV2: Server 2, SV3: Server 3
Set the target for the transfer and operation.
Parameter string Target
PUTFILE File
PUTFILE-OVW File
PUTFILE-REN File
GETFILE File
PUTDATA Device
PUTDATA-OVW Device
PUTDATA-REN Device
GETDATA Device
Transfer operation
Send to servers (Overwrite method)
Send to servers (Overwrite method)
Send to servers (Rename method)
Obtain from servers
Send to servers (Overwrite method)
Send to servers (Overwrite method)
Send to servers (Rename method)
Obtain from servers
Setting
range
0 to 15
17-61