Panasonic FP7 Series Command Reference Manual page 794

14.37 ESREP (Replacement of a String: With Storage Area Size)
Area in which the string to
(a)
be taken out is stored
(1) Storage area size
■
Precautions for programming
● If the number of characters [n] is larger than the number of characters in the string [S1] as
from the position specified by [p], then the replacement is performed for the number of
characters of the string [S] as from the position specified by [p].
● The [p] position should be specified by a number counted from low order in sequence,
putting the least significant byte as K0 (Byte 0): 0, 1, 2 and so on.
● When specifying with a character constant, the maximum is 256 characters.
● When specifying an empty string for [S1], the result is always 0.
■
Flag operations
Name
SR7
SR8
(ER)
SR9 (CY)
14-144
(b)
(2)
Description
To be set in the case of out-of-range in indirect access (index modification).
To be set when [S] (number of characters) is out of the range.
To be set when the number of characters of [D] is smaller than [n].
To be set when the position of [p] is larger than the number of characters of [D].
To be set when the number of characters is larger than the storage area size for [S] and [D].
To be set when a data table with a storage area size of 0 or 65535 is specified.
To be set when [n] (number of characters to be replaced) is out of the range.
To be set when the number of characters taken out is larger than the storage area size of
[D].
Destination area (before
transferring)
Character count
Destination area (after
(c)
transferring)
-
WUME-FP7CPUPGR-12