Panasonic FP7 Series Command Reference Manual page 925

Partner unit IP address: 1111:1222::1555:0:0:1999, Partner unit port number: 10000, Unused
Settings
connection disconnect time: 30000
Examp
S2 "IPv4=192.255.100.11,PORT=2500,DISCONT=50"
le 3
Partner unit IP address: 192.255.100.11, Partner unit port number: 2500, Unused connection
Settings
disconnect time: 50
<When specifying Server (when connecting to FP7)>
● The master unit port number is set by being incremented by one for each connection from
the setting start connection number to the setting end connection number. The unused
connection disconnect time is not incremented.
● An error occurs if the port number exceeds 65535 when it is incremented.
Setting
Settings
item
Master unit port
number
(Essential)
S2
Unused connection
disconnect time
(Essential)
Setting example
Examp
S2 "PORT=9000,DISCONT=0"
le 1
Settings Master unit port number: 9000, Unused connection disconnect time: 0
Examp
S2 "PORT=10000,DISCONT=30000"
le 2
Settings Master unit port number: 10000, Unused connection disconnect time: 30000
Examp
S2 "PORT=10000,DISCONT=70"
le 3
Settings Master unit port number: 10000, Unused connection disconnect time: 70
■
Operand [D1] setting
● Specify the device address storing a setting start connection number or a constant.
Setting
Settings
item
Setting start connection
D1
number
■
Operand [D2] setting
● Specify the device address storing a setting end connection number or a constant.
WUME-FP7CPUPGR-12
17.6 CONSET (User Connection Setting)
Specify the master unit port number (1 to 65535) of setting start
connection.
Specify the keyword "PORT=" at the beginning.
PORT=xxxx
Specify unused connection disconnect time (0 to 4294967295: 10 ms unit).
However, when 0 is specified, connection is not automatically
disconnected.
Specify the keyword "DISCOUNT=" at the beginning.
DISCONT=xxxx
Specify setting start connection number.
Setting range
1 to 216
(maximum)
17-37