Panasonic FP7 Series Command Reference Manual page 953

Hide thumbs Also See for FP7 Series:

Table of Contents

Device setting, Device division: Global, Device code: WL, Device No.: 10

Number of transferred data: 128 (128 words), Conversion method: Unconverted 16-bit binary, Line

feed position: Output the end of file only

"PB100_WR1000,50,US,0"

Device setting, Device division: Local, PB number: 100, Device code: WR, Device number: 1000

No. of transferred data: 50 points (50 words), Conversion method: 16-bit unsigned decimal, Line

feed position: Output the end of file only

"PB15_LD16,40,HEX4w,2"

Device setting, Device division: Local, PB number: 15, Device code: LD, Device number: 16

No. of transferred data: 40 points (160 words), Conversion method: 64-bit HEX, Line feed position:

Output by 2 data

"PB10_WL10,32,UL"

Device setting, Device division: Local, PB number: 10, Device code: WL, Device number: 10

No. of transferred data: 32 points (64 words), Conversion method: 32-bit unsigned decimal, Line

feed position: Output the end of file only

"PB1_WY128,5"

Device setting, Device division: Local, PB number: 1, Device code: WY, Device number: 128

Number of transferred data: 5 (5 words), Conversion method: Unconverted 16-bit binary, Line feed

position: Output the end of file only

Operand [S3] setting (when getting device)

● Specify the starting address of the device area that stores the string data that indicates

destination device settings, or a character constant.

transferred data

(data amount)

WUME-FP7CPUPGR-12

17.12 FTPcSET (FTP Client Transfer Setting)

● Global devices

Specify device code + device number.

● Local devices

"PB" + PB number + "_" (underscore) + device code + device

Devices that can be specified

Global devices

Specify the number of transferred data (number of data).

* The number of data that can be transferred simultaneously is

1MB for all 16 IDs. They are calculated with file size.

Local devices