Panasonic FP7 Series Command Reference Manual page 1097

● The file name is "dt010.bin". The file number 10 specified by [D] is added.
[i]...US
[S] ...DT110
DT108 H 0108
H 0109
DT109
DT110 H 0110
H 0111
DT111
DT112 H 0112
DT113 H 0113
DT114
H 0114
DT115 H 0115
DT116
H 0116
DT117 H 0117
DT118 H 0118
■
Precautions for programming
● Also refer to section
● When the set file attribute is read only, any data cannot be written.
● The SD memory card access instruction active flag (SR3A) turns ON after the execution
condition has turned ON until the completion of the execution of the instruction. During this
time other SD memory card access instructions cannot be executed.
● Confirm that the SD memory card access instruction execution done flag (SR3B) is turned
OFF, and turn OFF the execution condition.
■
Flag operations
Name
SR3A (SD memory card access
instruction execution in progress)
SR3B (SD memory card access
instruction execution complete)
SR3C (SD memory card access
instruction execution result)
SR7, SR8 (ER)
WUME-FP7CPUPGR-12
18.1 CDTWT (Operation Memory File Write in BIN Format)
[n] ...5 [D] ...10
File dt010.bin (16-bit binary format)
"19.9 Common Precautions for SD Memory Card Access
Description
Turns ON when instruction execution starts. Turns OFF when
instruction execution is complete.
Turns OFF when instruction execution starts. Turns ON when
instruction execution is complete.
Indicates the execution results when instruction execution is
complete. Normal end = 0, abnormal end = 1
To be set in case of out-of-range values in indirect access (index
modification).
To be set when an out-of-range value is specified for [n].
To be set when an out-of-range value is specified for [D].
1001110112 0113011401
Instructions".
18-3