Panasonic FP7 Series Command Reference Manual page 915

Cpu unit
Hide thumbs Also See for FP7 Series:
Table of Contents

Advertisement

Ethernet initialization active
(X61)
IP address established
(X62)
FTP server preparation done
(X64)
FTP client preparation done
(X65)
HTTP client preparation done
(X68)
SMTP client preparation done
(X69)
Master communication clear to
send flag
General-purpose communication
clear to send flag
(1) PROG > RUN (Power ON)
Ethernet initialization completed
FTP client/SMTP client preparation
(2)
completed
Connection established
Flag operations
Name
Description
Set when a value outside the range is specified for the parameter.
Set when the same keyword is specified redundantly.
SR7
To be set when the slot number [S1] specified with UNITSEL is not 100 (built-in ET-LAN).
SR8
To be set when the setting is other than IPv4.
(ER)
To be set when executed in an interrupt program.
Set when the number of characters for operand specifying character constant exceeds 256.
Set when the instruction is executed while the specified IP address is incorrect. The detail code
set in SD29 is "1: Specification of incorrect IP address".
Set when the instruction is executed while the specified subnet mask is incorrect. The detail code
set in SD29 is "2: Specification of incorrect subnet mask".
CY
Set when the instruction is executed while the specified default gateway is incorrect. The detail
code set in SD29 is "3: Specification of incorrect default gateway".
(SR9)
To be set when executed in combination with incorrect IP addresses. The detail code set in SD29
is "4: Combination of incorrect IP addresses".
Set when the instruction is the initialization of Ethernet. The detail code set in SD29 is "11:
Ethernet initialization active".
(Note 1)
For details of the error codes stored in the system data SD29, refer to
Registers".
WUME-FP7CPUPGR-12
(1)
(2)
About 3 sec.
17.4 IPv4SET (IP Address Setting)
(3)
(4)
About 3 sec.
(3) IPv4 address setting (Executes IPv4SET instruction)
Ethernet initialization completed
(4)
FTP client/SMTP client preparation completed
Connection established
"20.2 List of System Data
17-27

Advertisement

Table of Contents
loading

Table of Contents