Panasonic FP7 Series Command Reference Manual page 900

17.2 ETSTAT (Acquiring Ethernet Unit Information: IP/MAC/Destination)
Value
-DT15
DT16
-
-DT23
DT24
-
-DT31
DT32 H0100 (U64)
DT33 HFE80
DT34 H0000
DT35 H0000
DT36 H0000
DT37 H0000
DT38 H0000
DT39 H0000
DT40 H0001
DT41 HAABB
DT42 HCCDD
DT43 HEEFF
Example 5) When specifying the destination port number for a specified IPv4
connection
The results are stored in the 19-word area that starts with [D].
[S1]... "IPv4" [S2]... "CONNECT1" [D]...DT20
Value
DT20 H00C0 (U192)
DT21 H00A8 (U168)
DT22 H0005 (U5)
DT23 H001E (U30)
DT24 H00FF (U255)
DT25 H00FF (U255)
DT26 H00FF (U255)
DT27 H0000 (U0)
DT28 H00C0 (U192)
DT29 H00A8 (U168)
DT30 H0005 (U5)
DT31 H0001 (U1)
DT32 H9001
DT33 H0000
DT34 H00C0 (U192)
17-12
Description
When [Automatically acquire IPv6 address] - [Acquire from router] is selected, the
master unit IPv6 address is stored. For manual setting, "0" is stored.
When [Automatically acquire IPv6 address] - [Acquire from DHCP] is selected,
the master unit IPv6 address is stored. For manual setting, "0" is stored.
The subnet prefix length is stored.
Example) 64
The Ipv6 address of the default gateway is stored.
Example) fe80::1
The MAC address of the destination unit is stored.
Example) AA-BB-CC-DD-EE-FF
Description
The master unit IPv4 address is stored.
Example) 192.168.5.30
The subnet mask is stored.
Example) 255.255.255.0
Default gateway
Example) 192.168.5.1
The master unit port number is stored.
This value indicates the type of the IP address. For IPv4, the value is "0".
The destination IPv4 address is stored.
WUME-FP7CPUPGR-12