Found search events are marked with white triangles at the top of the graticule,
and the number of events found is displayed in the menu line just above the sofkey
labels.
To set up searches
1 Press [Search].
2 Setting up searches is similar to setting up triggers:
Remember that searches use the measurement threshold settings instead of
trigger levels. Use the Thresholds softkey in the Search Menu to access the
Measurement Threshold Menu. See
Navigating the Time Base
You can use the [Navigate] key and controls to navigate through:
• Captured data (see
• Search events (see
• Segments, when segmented memory acquisitions are turned on (see
To navigate time
When acquisitions are stopped, you can use the navigation controls to play
through the captured data.
1 Press [Navigate].
2 In the Navigate Menu, press Navigate; then, select Time.
3 Press the
Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide
•
For setting up Serial searches, see
137 and
"Searching Lister Data"
"To navigate time"
"To navigate search events"
navigate segments"
on page 58).
time. You can press the
playback. There are three speed levels.
Chapter
on page 122.
"Measurement Thresholds"
on page 57).
navigation keys to play backward, stop, or play forward in
or
keys multiple times to speed up the
Horizontal Controls
10, "Triggers," starting on page
on page 223.
on page 58).
2
"To
57