To Navigate Search Events; To Navigate Segments - Keysight Technologies InfiniiVision 2000 X Series User Manual

2
Horizontal Controls

To navigate search events

When acquisitions are stopped, you can use the navigation controls to go to found
search events (set using the [Search] key and menu, see
page 56).
1 Press [Navigate].
2 In the Navigate Menu, press Navigate; then, select Search.
3 Press the
When searching Serial decode:
• You can press the
• The Auto zoom softkey specifies whether the waveform display is automatically
• Pressing the Scroll Lister softkey lets you use the Entry knob to scroll through

To navigate segments

When the segmented memory acquisition is enabled and acquisitions are stopped,
you can use the navigation controls to play through the acquired segments.
1 Press [Navigate].
2 In the Navigate Menu, press Navigate; then, select Segments.
3 Press Play Mode; then, select:
58
back and forward keys to go to the previous or next search
event.
zoomed to fit the marked row as you navigate.
data rows in the Lister display.
• Manual — to play through segments manually.
In the Manual play mode:
• Press the
segment.
• Press the softkey to go to the first segment.
• Press the softkey to go to the last segment.
• Auto — to play through segments in an automated fashion.
In the Auto play mode:
stop key to set or clear a mark.
back and forward keys to go to the previous or next
Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide
"Searching for Events" on