Voltage Measurements - Keysight Technologies InfiniiVision 2000 X Series User Manual

14
Measurements
You can also configure the [Quick Action] key to display the Snapshot All popup.
See

Voltage Measurements

The following figure shows the voltage measurement points.
Measurement units for each input channel can be set to Volts or Amps using the
channel Probe Units softkey. See
The units of math waveforms are described in
page 71.
•
•
208
"Configuring the [Quick Action] Key"
Maximum
Amplitude
"Peak-Peak" on page 209
"Maximum" on page 209
on page 291.
Peak-Peak
Minimum
"To specify the channel units"
"Units for Math Waveforms"
Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide
Top
Base
on page 66.
on