To Save Lister Data Files - Keysight Technologies InfiniiVision 2000 X Series User Manual

18
Save/Recall (Setups, Screens, Data)
• When saving to a CSV format file, the maximum number of data points is
When necessary, the Length control performs a "1 of n" decimation of the data .
For example: if the Length is set to 1000, and you are displaying a record that is
5000 data points in length, four of each five data points will be decimated,
creating an output file 1000 data points in length.
When saving waveform data, the save times depend on the chosen format:
Data File Format
BIN
ASCII XY
CSV
See Also •
•
•

To save Lister data files

Lister data files can be saved to an external USB storage device.
1 Press [Save/Recall] > Save > Format; then, turn the Entry knob to select Lister data
2 Press the softkey in the second position and use the Entry knob to navigate to
3 Press the Settings softkey.
4 Finally, press the Press to Save softkey.
262
50,000.
"Binary Data (.bin) Format"
"CSV and ASCII XY files"
"Minimum and Maximum Values in CSV Files"
file.
the save location. See
In the File Settings Menu, you have these softkeys and options:
• Setup Info — when enabled, setup information (vertical, horizontal, trigger,
acquisition, math, and display settings) is also saved in a separate file with a
TXT extension.
A message indicating whether the save was successful is displayed.
Save Times
fastest
medium
slowest
on page 315
on page 322
"To navigate storage locations"
Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide
on page 323
on page 264.