To Set Up Network Printer Connections - Keysight Technologies InfiniiVision 2000 X Series User Manual

19
Print (Screens)
4 Press the Options softkey to select the print options.
5 Press the Palette softkey to select the print palette. See
6 Press the Press to Print softkey.
You can stop printing by pressing the Cancel Print softkey.
The oscilloscope will print the last menu visited before you pressed the [Print] key. Therefore,
NOTE
if you have measurements (Amplitude, Frequency, etc.) showing on the display before you
press [Print], the measurements will be shown on the printout.
To print the display showing the Print Configuration Menu at the bottom, press the [Print] key
twice; then, press the Press to Print softkey.
You can also configure the [Quick Action] key to print the display. See
the [Quick Action] Key"
See Also •

To set up network printer connections

When the DSOXLAN LAN/VGA module is installed, you can set up network printer
connections.
A network printer is a printer attached to a computer or print server on the
network.
1 Press the [Print] key on the front panel.
270
See "To specify the print options"
option" on page 272.
"Adding an Annotation"
on page 272.
on page 291.
on page 292
Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide
"To specify the palette
"Configuring