Setup For Uart/Rs232 Signals - Keysight Technologies InfiniiVision 2000 X Series User Manual

Keysight InfiniiVision 2000 X-Series Oscilloscopes
User's Guide
25 UART/RS232 Triggering
and Serial Decode

Setup for UART/RS232 Signals / 361

UART/RS232 Triggering / 363
UART/RS232 Serial Decode / 365
The UART/RS232 triggering and serial decode option is license-enabled.
Setup for UART/RS232 Signals
To set up the oscilloscope to capture UART/RS232 signals:
1 Press [Label] to turn on labels.
2 Press [Serial].
3 Press the Mode softkey; then, select UART/RS232 trigger type.
4 Press the Signals softkey to open the UART/RS232 Signals Menu.
361