Usb Trigger - Keysight Technologies InfiniiVision 2000 X Series User Manual

Table 3 Half-field holdoff time
Standard
NTSC
PAL
PAL-M
SECAM
Figure 32 Using Field Holdoff to Synchronize to Color Field 1 or 3 (Field 1 mode)

USB Trigger

USB trigger will trigger on a Start of Packet (SOP), End of Packet (EOP) signal,
Reset Complete (RC), Enter Suspend (Suspend), or Exit Suspend (Exit Sus) on the
differential USB data lines (D+ and D-). USB Low Speed and Full Speed are
supported by this trigger.
Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide
Time
8.35 ms
10 ms
10 ms
10 ms
10
Triggers
165