Lister - Keysight Technologies InfiniiVision 2000 X Series User Manual

7
Serial Decode
Licensed Serial Decode
I2C (Inter-IC) and SPI (Serial Peripheral
Interface) serial buses.
UART (Universal Asynchronous
Receiver/Transmitter) protocols including
RS232 (Recommended Standard 232).
To determine whether these licenses are installed on your oscilloscope, see
display oscilloscope information"
To order serial decode licenses, go to
product number (see
local Keysight Technologies representative (see
www.keysight.com/find/contactus).

Lister

Lister is a powerful tool for investigating protocol failures. You can use Lister to
view large amounts of packet level serial data in a tabular format, including time
tags and specific decoded values. After pressing the [Single] key, you can press the
Scroll Lister softkey and then rotate the Entry knob to select an event and press the
Zoom to Selection softkey to jump to the event.
To use the Lister:
1 Set up trigger and decode on the serial data signals to be analyzed.
2 Press [Serial] > Lister.
3 Press Display; then, turn the Entry knob to select the serial slot (Serial 1) on
120
"Licensed Options Available"
which the serial bus signals are being decoded.
See:
• "I2C Serial Decode"
• "SPI Serial Decode"
• "UART/RS232 Serial Decode"
page 365.
on page 290.
www.keysight.com
Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide
on page 348.
on page 357.
on
and search for the
on page 312) or contact your
"To