18
Save/Recall (Setups, Screens, Data)
4 If you would like to clear the display, press Clear Display.
To recall mask files
Mask files can be recalled from one of four internal (\Keysight Flash) locations or
from an external USB storage device.
1 Press [Save/Recall] > Recall > Recall:; then, turn the Entry knob to select Mask
2 Press the softkey in the second position and use the Entry knob to navigate to
3 Press the Press to Recall softkey.
4 If you would like to clear the display or clear the recalled mask, press Clear
To recall reference waveform files from a USB storage device
1 Press the [Save/Recall] key.
2 In the Save/Recall Menu, press the Recall softkey.
3 In the Recall Menu, press the Recall softkey and turn the Entry knob to select
4 Press the To Ref: softkey and turn the Entry knob to select the desired reference
5 Press the softkey in the second position and use the Entry knob to navigate to
6 Press the Press to Recall softkey.
7 If you would like to clear the display of everything except the reference
Recalling Default Setups
1 Press the [Save/Recall] key.
266
A message indicating whether the recall was successful is displayed.
(*.msk).
the file to recall. See
A message indicating whether the recall was successful is displayed.
Display or Clear Mask.
Reference Waveform data (*.h5) .
waveform location.
the file to recall. See
A message indicating whether the recall was successful is displayed.
waveform, press Clear Display.
"To navigate storage locations"
"To navigate storage locations"
Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide
on page 264.
on page 264.