Print (Screens); To Print The Oscilloscope's Display - Keysight Technologies InfiniiVision 2000 X Series User Manual

Keysight InfiniiVision 2000 X-Series Oscilloscopes
User's Guide

19 Print (Screens)

To print the oscilloscope's display / 269

To set up network printer connections / 270
To specify the print options / 272
To specify the palette option / 272
You can print the complete display, including the status line and softkeys, to a
USB printer or a network printer when the DSOXLAN LAN/VGA module is
installed.
The Print Configuration Menu is displayed when you press the [Print] key. The print
option softkeys and the Press to Print softkey are ghosted (not available) until a
printer is connected.
To print the oscilloscope's display
1 Connect a printer. You can:
2 Press the [Print] key on the front panel.
3 In the Print Configuration Menu, press the Print to softkey; then, turn the Entry
• Connect a USB printer to either the USB port on the front panel or the
rectangular USB host port on the rear panel.
For the most up-to-date listing of printers that are compatible with the
InfiniiVision oscilloscopes, please visit
www.keysight.com/find/InfiniiVision-printers.
• Set up a network printer connection. See
connections" on page 270.
knob to select the desired printer.
"To set up network printer
269