To Save Reference Waveform Files To A Usb Storage Device; To Save Masks - Keysight Technologies InfiniiVision 2000 X Series User Manual

To save reference waveform files to a USB storage device

1 Press the [Save/Recall] key.
2 In the Save/Recall Menu, press the Save softkey.
3 In the Save Menu, press the Format softkey and turn the Entry knob to select
4 Press the Source softkey and turn the Entry knob to select the source waveform.
5 Press the softkey in the second position and use the Entry knob to navigate to
6 Finally, press the Press to Save softkey.

To save masks

Mask files can be saved to one of four internal (\User Files) locations or to an
external USB storage device.
1 Press [Save/Recall] > Save > Format; then, turn the Entry knob to select Mask
2 Press the softkey in the second position and use the Entry knob to navigate to
3 Finally, press the Press to Save softkey.
Mask files have the extension MSK.
Masks are also saved as part of setup files. See
NOTE
See Also •
Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide
Reference Waveform data (*.h5) .
the save location. See
A message indicating whether the save was successful is displayed.
(*.msk).
the save location. See
A message indicating whether the save was successful is displayed.
Chapter 15, "Mask Testing," starting on page 227
Save/Recall (Setups, Screens, Data)
"To navigate storage locations"
"To navigate storage locations"
"To save setup files"
on page 264.
on page 264.
on page 259.
18
263