Web Interface; Accessing The Web Interface - Keysight Technologies InfiniiVision 2000 X Series User Manual

21

Web Interface

The web interface for InfiniiVision X-Series oscilloscopes also provides help for
each of its pages.
Before you can use the web interface, you must place the oscilloscope on the
network and set up its LAN connection.

Accessing the Web Interface

To access the oscilloscope's web interface:
1 Connect the oscilloscope to your LAN (see
2 Type the oscilloscope's hostname or IP address in the web browser.
296
page 277) or establish a point-to-point connection (see
(Point-to-Point) Connection to a PC"
It is possible to use a point-to-point connection, but using a normal LAN
connection is the preferred method.
The oscilloscope's web interface Welcome Page is displayed.
"To establish a LAN connection"
on page 278).
Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide
on
"Stand-alone