Count Measurements; Positive Pulse Count; Negative Pulse Count - Keysight Technologies InfiniiVision 2000 X Series User Manual

14
Measurements
Maximum units are in dB and X at Max Y units are in Hertz for FFT.

Count Measurements

•
•
•
•

Positive Pulse Count

The Positive Pulse Count measurement is a pulse count for the selected waveform
source.
This measurement is available for analog channels.

Negative Pulse Count

The Negative Pulse Count measurement is a pulse count for the selected waveform
source.
222
"Positive Pulse Count"
"Negative Pulse Count"
"Rising Edge Count"
"Falling Edges Count"
Positive pulse count
on page 222
on page 222
on page 223
on page 223
Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide