21
Web Interface
Browser-Based Remote Front Panel
To operate the oscilloscope using the web interface's Browser-Based Remote
Front Panel:
1 Access the oscilloscope's web interface (see
2 When the oscilloscope's web interface is displayed, select Browser Web Control,
3 Click keys or knobs that you would normally press on the oscilloscope's front
Remote Programming via the Web Interface
If Java is not installed on your PC, you will be prompted to install the Sun Microsystems Java
NOTE
Plug-in. This plug-in must be installed on the controlling PC for the web interface's Remote
Programming operations.
298
page 296).
then select Remote Front Panel. After a few seconds the Remote Front Panel
appears.
panel. Buttons have been added for turning knobs.
"Accessing the Web Interface"
Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide
on