To Perform Front Panel Self Test; To Display Oscilloscope Information; To Display The User Calibration Status; To Clean The Oscilloscope - Keysight Technologies InfiniiVision 2000 X Series User Manual

20
Utility Settings

To perform front panel self test

Pressing [Utility] > Service > Diagnostics > Front Panel Self Test lets you test the front
panel keys and knobs as well as the oscilloscope display.
Follow the on-screen instructions.

To display oscilloscope information

Press [Help] > About Oscilloscope to display information about your oscilloscope:
• Model number.
• Serial number.
• Bandwidth.
• Module installed.
• Software version.
• Installed licenses. See also

To display the user calibration status

Pressing [Utility] > Service > User Cal Status displays the summary results of the
previous User Cal, and the status of probe calibrations for probes that can be
calibrated. Note that passive probes do not need to be calibrated.
Results:
User Cal date:
Change in temperature since last User Cal:
Failure:
Comments:
Probe Cal Status:

To clean the oscilloscope

1 Remove power from the instrument.
2 Clean the external surfaces of the oscilloscope with a soft cloth dampened with
3 Make sure that the instrument is completely dry before reconnecting it to a

To check warranty and extended services status

To learn the warranty status of your oscilloscope:
290
Information" on page 312.
a mixture of mild detergent and water.
power source.
"Loading Licenses and Displaying License
Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide