10 Triggers - Keysight Technologies InfiniiVision 2000 X Series User Manual

Keysight InfiniiVision 2000 X-Series Oscilloscopes
User's Guide

10 Triggers

Adjusting the Trigger Level / 138
Forcing a Trigger / 139
Edge Trigger / 140
Edge then Edge Trigger / 142
Pulse Width Trigger / 143
Pattern Trigger / 146
OR Trigger / 148
Rise/Fall Time Trigger / 150
Nth Edge Burst Trigger / 151
Runt Trigger / 152
Setup and Hold Trigger / 154
Video Trigger / 155
USB Trigger / 165
Serial Trigger / 167
A trigger setup tells the oscilloscope when to acquire and display data. For
example, you can set up to trigger on the rising edge of the analog channel 1 input
signal.
You can adjust the vertical level used for analog channel edge detection by
turning the Trigger Level knob.
In addition to the edge trigger type, you can also set up triggers on rise/fall times,
Nth edge bursts, patterns, pulse widths, runt pulses, setup and hold violations, TV
signals, USB signals, and serial signals (if option licenses are installed).
You can use any input channel or the "External Trigger Input" on page 174 BNC as
the source for most trigger types.
137