Acknowledgements; Product Markings And Regulatory Information - Keysight Technologies InfiniiVision 2000 X Series User Manual

22
Reference

Acknowledgements

Third-party software acknowledgements and licenses for these InfiniiVision
X-Series oscilloscopes are located at
www.keysight.com/find/2000X-3000X-Series-third-party-software.

Product Markings and Regulatory Information

These symbols are used on the 2000/3000 X-Series oscilloscopes.
Symbol
324
Description
Caution, risk of electric shock
Caution, refer to accompanying documentation
The crossed out wheeled bin symbol indicates that separate collection for
waste electric and electronic equipment (WEEE) is required, as obligated
by the EU DIRECTIVE and other National legislation.
Please refer to
in options with Keysight in addition to product takeback instructions.
Indicates the time period during which no hazardous or toxic substance
elements are expected to leak or deteriorate during normal use. Forty
years is the expected useful life of the product.
The RCM mark is a registered trademark of the Australian
Communications and Media Authority.
The CE mark is a registered trademark of the European Community.
ICES/NMB-001
ICES / NMB-001 Cet appareil ISM est conforme a la norme NMB du
Canada. This is a marking to indicate product compliance with the
ISM GRP 1-A
Industry Canadian Interference-Causing Equipment Standard (ICES-001).
This is also a symbol of an Industrial Scientific and Medical Group 1 Class
A product (CISPR 11, Clause 4).
The CSA mark is a registered trademark of the CSA International.
keysight.com/go/takeback
Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide
to understand your Trade