Setup For Spi Signals - Keysight Technologies InfiniiVision 2000 X Series User Manual

Table of Contents

Advertisement

2 In the Search Menu, press the Search softkey; then, turn the Entry knob to select
3 Press Search; then, select from these options:
For more information on searching data, see
For more information on using the [Navigate] key and controls, see
Time Base"

Setup for SPI Signals

Serial Peripheral Interface (SPI) signals setup consists of connecting the
oscilloscope to a clock, MOSI data, MISO data, and framing signal, then setting
the threshold voltage level for each input channel, and finally specifying any other
signal parameters.
To set up the oscilloscope to capture SPI signals, use the Signals softkey which
appears in the Serial Decode Menu:
1 Press [Label] to turn on labels.
2 Press [Serial].
3 Press the Mode softkey; then, select SPI trigger type.
Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide
the serial slot (Serial 1 or Serial 2) on which the I2C signal is being decoded.
Missing Acknowledge — finds SDA data is high during any Ack SCL clock bit.
Address with no Ack — finds when the acknowledge of the selected address
field is false. The R/W bit is ignored.
Restart — finds when another start condition occurs before a stop condition.
EEPROM Data Read — finds EEPROM control byte value 1010xxx on the SDA
line, followed by a Read bit and an Ack bit. It then looks for the data value
and qualifier set by the Data is softkey and the Data softkeys.
Frame(Start:Address7:Read:Ack:Data) — finds a read frame on the 17th clock
edge if all bits in the pattern match.
Frame(Start:Address7:Write:Ack:Data) — finds a write frame on the 17th clock
edge if all bits in the pattern match.
Frame(Start:Address7:Read:Ack:Data:Ack:Data2) — finds a read frame on the 26th
clock edge if all bits in the pattern match.
Frame(Start:Address7:Write:Ack:Data:Ack:Data2) — finds a write frame on the
26th clock edge if all bits in the pattern match.
on page 57.
I2C/SPI Triggering and Serial Decode
"Searching Lister Data"
24
on page 122.
"Navigating the
351

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents