Searching For Lin Data In The Lister - Keysight Technologies InfiniiVision 2000 X Series User Manual

23
CAN/LIN Triggering and Serial Decode

Searching for LIN Data in the Lister

The oscilloscope's search capability lets you search for (and mark) certain types of
LIN data in the Lister. You can use the [Navigate] key and controls to navigate
through the marked rows.
1 With LIN selected as the serial decode mode, press [Search].
2 In the Search Menu, press the Search softkey; then, turn the Entry knob to select
3 Press Search; then, select from these options:
For more information on searching data, see
For more information on using the [Navigate] key and controls, see
Time Base"
342
the serial slot (Serial 1 or Serial 2) on which the LIN signal is being decoded.
• ID — Finds frames with the specified ID. Press the Frame ID softkey to select
the ID.
• ID & Data — Finds frames with the specified ID and data. Press the Frame ID
softkey to select the ID. Press the Bits softkey to enter the data value.
• Errors — Finds all errors.
on page 57.
"Searching Lister Data"
Keysight InfiniiVision 2000 X-Series Oscilloscopes User's Guide
on page 122.
"Navigating the